Home >> Ahmedabad >> Central Institute of Plastics Engineering & Technology Ahmedabad >> Admission

Central Institute of Plastics Engineering & Technology Ahmedabad Admission

Ahmedabad, Gujarat | Reviews/Ratings: - Add Review
Overview
Overview
Courses Fee Structure
Courses Fee
Admission Procedure
Admission

Eligibility Criteria/Cut-off for Admissions 2022

CIPET is one of the most progressive institutes of plastic engineering and Technology set up by the Government of India in 1984. CIPET is affiliated with Gujarat Technological University and approved by the AICTE, New Delhi. CIPET offers undergraduate, postgraduate, and Diploma courses in the field of plastic engineering and Technology.

  • CIPET offers Bachelors's in engineering courses under various specializations. The selection process for the BE course in CIPET is conducted via the score achieved in the entrance exam GUJCET or JEE mains. In addition, candidates must have passed 10+2 from recognized boards of education, with Mathematics, Physics, and Chemistry being compulsory.
  • CIPET provides Masters in Engineering and Masters in Science courses under different disciplines. Admission in ME and M.Sc  courses at CIPET is based on the entrance exam GUJCET or GATE.
  • Along with BE, ME, and M.Sc courses, CIPET also offers Diploma programs in plastic engineering and Technology under various specifications. Admission will be offered based on the entrance exam conducted by the institute, the CIPET-Joint Entrance exam.

Central Institute of Plastic Engineering BE admission:

CIPET provides a full-time, on-campus Bachelors in Engineering program in the field of plastic engineering and Technology. The streams are Plastic Engineering and Manufacturing Engineering. Candidates seeking admission in BE courses at CIPET must undertake the state-level entrance exam GUJCET or national level entrance exam JEE-Mains.

  • Candidates must pass 10+2 with any UGC/AIU-approved board of education, with Mathematics, Physics, and Chemistry being the mandatory subject.
  • The selection would be based on the score achieved by the candidates in the entrance exam.

Course

Specializations

Eligibility

BE.

Plastic Engineering, Manufacturing Engineering

10+2 from any recognized board of education with Mathematics, Chemistry, and physics as compulsory subjects

GUJCET/JEE-Mains score

Central Institute of Plastic Engineering and Technology ME admission:

CIPET provides a full-time Masters in Engineering degree in the field of Plastic Engineering and Technology. ME course is offered under one specialization, Plastic Engineering.

  • Candidates aspiring for admission in ME courses at CIPET must undertake the state level entrance exam PGCET or National level entrance exam GATE.
  • To be eligible to apply in ME Courses at CIPET, candidates must have a BE or B.Tech degree in the field of Chemical/plastic/rubber/ polymer Engineering and Technology from any recognized university. The final selection criteria will be based on the merit of the student.

Course

Specializations

Eligibility

ME/M Tech

Plastic Engineering

B.Tech or BE degree from any recognized university in the field of Plastic/Chemical/Rubber/Polymer Engineering.

Selection is based on
PGCET or GATE score.

Central Institute of Plastic Engineering and Technology M.Sc admission:

CIPET offers a Masters in Science (M.Sc) degree in Polymer Science. The timeline of the program is two years and four semesters.

  • Candidates willing to take admission in M.Sc course at CIPET have to go through state level entrance exam PGCET or national level entrance exam GATE.
  • Students must have Bachelors in Science (B.Sc.) degree from any recognized university with Polymer science/ industrial polymer chemistry/chemistry/applied chemistry/industrial chemistry as the mandatory subject. The final evaluation would be based on the entrance exam score.

Course

Specializations

Eligibility

M.Sc

Polymer Science

B.Sc Degree from any recognized university with Polymer science/ industrial polymer chemistry/chemistry/applied chemistry/industrial chemistry as the mandatory subject.

Selection is based on
PGCET or GATE score

Central Institute of Plastic Engineering and Technology Diploma admission:

CIPET offers a UG Diploma program in plastic engineering and Technology under two different specializations, Plastic Technology and plastic mould technology.

  • Candidates seeking admission in Diploma courses at CIPET must undertake an entrance exam conducted by the institute CIPET-JEE.
  • Candidates must have passed 10th from any recognized board of education. The final evaluation would be based on the score achieved in the entrance exam.

Course

Specializations

Eligibility

UG  Diploma

Plastic Technology, Plastic Mould Technology

10th from any recognized board of education.

Selection will  be based on CIPET-JEE

Central Institute of Plastic Engineering and Technology PG Diploma admission:

CIPET provides a PG Diploma program in plastic engineering and Technology under one specialization, Plastic Processing and Testing. The course spread is of 2 years and four semesters. Candidates aspiring admission in PG Diploma courses in CIPET  have to undergo institute conducted entrance exam CIPET-JEE. In addition, students must have three years or equivalent Bachelors in Science. The final selection would be based on the marks obtained in the entrance exam.

Course

Specializations

Eligibility

PG Diploma

Plastic Processing and Testing

Three years or equivalent degree in Science from any recognized university

Central Institute of Plastic Engineering and Technology admission process:

  • ACPC would carry forward admission for BE, ME, and M.Sc courses. 
  • Candidates should visit the official website of ACPC and register themselves.
  • Selected candidates would be called for counselling on campus.
  • For UG and PG Diploma courses, CIPET offers an online mode of application.
  • Candidates are required to visit the official site of the institute and register themselves as new candidates.
  • After registration, fill up the application forms, upload the required documents and submit the application form after paying the application fee.

Reviews

by Anjana, 21 Dec 2020
Class of 2021
Rating
5/5

I was the student in this institution; I completed my graduation from this college. As per my knowledge the institution offers UG & PG courses in engineering. After my 12th I appeared for JEE Mains and on the basis of score I got admission in this college to do B.Tech in computer science engineering. Apart from JEE Mains candidates can also appear for GUJCET and must secure valid score as per the cut off marks. Minimum eligibility for admission into graduation is to have at least 50% aggregate marks with PCM as the compulsory subject. I completed B.Tech with the total amount of 2.60 Lakhs.

Worth the Money
Crowd & Campus Life
Salary & Placements
Campus Facilities

Asked Question

what is the B.Sc. admission procedure?
Asked by Sowrab Nehwal

replied on 13-Nov-2019 14:19:24

On basis of merit in B.Sc. or any other equivalent degree marks Central Institute admissions will be granted also for all the streams of B.Sc. the admission procedure is same. To process with the admissions one got to fill the application form.


Central Institute of Plastics Engineering & Technology Cutoff for B.TECH
Asked by BHUKYA KUMAR

replied on 12-Mar-2018 11:22:45

Hi BHUKYA,

The Central Institute of Plastics Engineering & Technology Cutoff for B.TECH in Chhattisgarh-Pre-Engineering-Test is:

  • B.Tech Plastic Engineering in General is 85
  • B.Tech Plastic Engineering in Schedule Caste is 47
  • B.Tech Plastic Engineering in Schedule Tribe is 49
  • B.Tech Plastic Engineering in SC Girl is 37
  • B.Tech Plastic Engineering in ST Girl is 40
  • B.Tech Plastic Engineering in OBC Girl is 46
  • B.Tech Plastic Engineering in Other Backward Class is 49
  • B.Tech Plastic Engineering in General FF is 70
  • B.Tech Plastic Engineering in General Girl is 70

And based on the previous year cutoff this year Central Institute of Plastics Engineering & Technology Cutoff for B.TECH is been evaluated.


haw many fee in ME, M. tech courceand institute is self finance or government?
Asked by trapasiya khushbu

replied on 02-Jan-2018 10:01:35

Hi Trapasiya,

Here is the fee structure for the courses in Central Institute of Plastics Engineering & Technology is:

  • The fees for M.Tech is 57734
  • And the duration for M.Tech is 2 years.

I WANT TO TAKE ADMISSION IN B.TECH PROGRAMS IN CIPET .HOW IT CAN BE DONE ??
Asked by TARANG MISHRA

replied on 04-May-2017 07:19:22

B.TECH Admission in Central Institute of Plastics Engineering & Technology Ahmedabad will be done as per the guidelines of ACPC, Gujarat. 


Interested in Central Institute of Plastics Engineering & Technology Ahmedabad